PRODUCT NAME: POLISH THINNER (ALL PURPOSE)
PRODUCT CODE: TPL128Z
MANUFACTURE/DISTRIBUTOR: KVN COSKM, INC
(3415 EMPIRE BLVD. ATLANTA, GA 30354)
EMERGENCY TELEPHONE: 1866 – COSCHEM
WEBSITE MSDS INFORMATION AT WWW.KVNCOSKM.COM
SECTION II- MANUFACTURER’S INDENTIFICATION
CHEMICAL FAMILY: THINNER SOLVENT (CLASIFY AS PAINT COATING)
TYPICAL AND PROPERTY: Ethyl Acetate, Butyl Acetate, xylene, dibutyl phalate , ethylene glycol
MANUFACTURER’S NAME: Acetate Solvent
SECTION III- HAZARDOUS INGREDIENTS/PHYSICAL CHARACTERISTIC
SOLUBILITY IN WATER: Moderate
APPEARANCE AND ODOR: Colorless viscous liquid with sweet ester odor.
SECTION IV FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: 60 F METHOD USED: TCC
FLAABLE LIMITS IN AIR BY VOLUME- LOWER: 1. 7 UPPER: 12
EXTINGUISHING MEDIA: Water is the most effective fire extinguishing medium for . It is recommended to be used in large volume. Dry chemical, C02 or universal type foam could used to extinguish small fires.
SPECIAL FIREFIGHTING PROCEDURES
• Wear self—contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Use water spray to keep fire—exposed containers cool.
UNUSUAL FIRE AND EXPLOSION HAZARDS
Handle as flammable liquid. Vapor form an explosive mixture in air between the upper and lower explosive limit which can be ignited by many ounces such as pilot lights, open flames ,electrical motors and switches
SECTION V - REACTIVITY DATA
CONDITIONS TO AVOID
Flame, electric spark, static, and heat.
INCOMPATIBILITY (MATERIALS TO AVOID)
Thisproduct is incompatible with strong acids or bases and oxidizers. -
HAZARDOUS DECOMPOSITION OR BYPRODUCTS
Thermal decomposition in the presence of air may yield carbon monoxide, carbon dioxide, and nitrogen oxide. Under some conditions, methane, irritating aldehydes and carboxylic acids and hydrogen cyanide may be formed.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR.
SECTION VI - HEALTH HAZARD DATA
INHALATION HEALTH RISKS AND SYMTOMS OF EXPOSURE
breathing high concentrations of vapors or mist may cause irritation of the nose and throat. Signs of nervous system depression (e.g., drowsiness, dizziness, loss of coordination, and fatigue).
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
EYE: This product may cause eye irritation. Direct contact with this material or exposure to its vapors or mists (greater than approximately 1000 ppm) may cause burning, tearing, redness, and swelling.
SKIN: This product may cause skin irritation. Prolonged or repeated exposure to this material may cause redness and burning, drying and cracking of and dermatitis.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE HEATH HAZARDS (ACUTE AND CHRONIC)
No ingredient present in this product is identified as a carcinogen or probable carcinogen by NTP, IARC, or OSHA. Reports have associated repeated and prolonged occupational overexposure to solvent present in this product with permanent brain and nervous system damage (sometimes referred to as solvent or painters syndrome) - Intentional misuse by deliberately concentrating and inhaling this product may be harmful or fatal.
CARCINOGENICITY: NTP CARCINOGEN: No IARC MONOGRAPHS: No OSHA REGULATED:
No MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
Respiratory symptoms associated with pre—existing lung disorders (e.g., asthma—like conditions) may be aggravated by exposure to the vapors of this material.
Persists with pre-existing skin disorders may be more susceptible to the effects of this material.
EMERGENCY AND FIRST AID PROCEDURES
- Inhalation: In case of irritations by vapor, remove from exposure, treat symptomatically, and get medical attention if symptoms persist.
- Eyes: Any material that contacts the eye should be washed out immediately and medical attention obtained if symptoms persist.
- Skin: Wash with soap and plenty of water. -Ingestion: Call a physician or poison .control center immediately. Induce vomiting as directed by medical personnel.
Never give anything by mouth to an unconscious person.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Stay upwind and away from spill. Keep all sources of ignition and hot metal surfaces away from spill. Keep out of drains, sewers, or waterways.
Use sand or other inert material to dam and contain spill. Do not flush with water; use absorbent pads. For large spills call response team and notify appropriate state/local agencies. Immediately notify the National Response Center (phone number: 800-424-8802) in case if the spill is in excess of EPA reportable quantity WASTE DISPOSAL METHOD
Dispose of product in accordance with local, Country, state, and federal regulations.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
Use nod-sparking utensils when handling this material. Keep containers, tightly closed, cool, dry and away from sources of ignition.
Smoking in area where this material is used should be strictly prohibited. Use with adequate ventilation. If normal ventilation is not adequate use with NIOSH approval red respirator or exhaust fans.
SECTION VIII - CONTROL MEASURES
PREVENTSTIVE MEASURES: keep containers and storage containers closed-when not in use. Do not store near heat, sparks, flame, or strong Oxidants. While transferring this material the containers used in this process has to be effectively grounded ultimately to an earth ground) to prevent fire Or explosion risk from static accumulation in accordance with the National Fire Protection Association standard for petroleum products.
RESPIRATORY PROROTECTION: Vapor concentration exceeds the established exposure limits respiratory protection is necessary. Depending on the airborne concentration, use a respirator or gas mask with appropriate cartridges and canisters (NIOSH) approved organic vapor or supplied air equipments.
The ventilation system should be designed to be able to maintain airborne concentrations below the established exposure limits. If the current ventilation is not adequate to maintain this level, additional ventilation or exhaust systems may be required. Use explosion proof equipment.
The use of gloves impermeable to the specific material handled is advised to prevent skin contact and possible irritation.
EYE PROTECTION: Safety glasses with side shields (or goggles) re recommended for any type of industrial chemical handling.
OTHER PROTECTIVE CLOTHING OR EQUIPNENT
The use of gloves impermeable to the specific material handled is advised to prevent skin contact and possible irritation. Use splash goggles (NIOSH approved) to safeguard against potential eye contact, irritation or injury.
Minimize breathing vapor or mist. Avoid prolonged or repeated contact with skin. Maintain a source of clean water to be available in work area for flushing eyes and skin. Remove contaminated clothing, launder or dry clean before use.. Product is readily removed from skin by waterless hand cleaners or solvents (acetone or esters) followed by washing with soap and water. Impervious clothing should be worn as needed.
SECTION IX - SHIPPING IMFORMATION
- Shipping Name; Paint
- Hazard Class; 3 (Flammable Liquid)
- Packaging Group: PG II
- ID Number: 1263
KEEP AWAY FROM CHILDREN AND ANIMALS. FOR TOPICAL USE ONLY.
SECTION X- DISCLAIMER OF LIABILITY
We recommend that containers be either professionally reconditioned for reuse by certified firms or properly disposal of by certified firms to help reduce the possibility of an accident. Disposal of containers should be in accordance with applicable federal, state and local laws and regulations the information in this MSDS was obtained from sources, which we believe are reliable. However, the information is provided without any representation or warranty, expressed or implied, regarding its correctness. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. Users should make their own investigation to determine the suitability of the information